Showing posts with label NH. Show all posts
Showing posts with label NH. Show all posts

Tuesday, May 22, 2012

THESE WHEELS from SKATEONE/POWELL coming to PIONEERS in NH

George Powell the urethane guru and the guys over at Skateone are at it again!! This time they created a new longboard wheel and if there anything like any of the other wheels/urethane that have come out of skateone over the past 30+years they should be insane.

These Wheels is a new freeride/slide wheel created by the guys over at  Skate One Corp which consists of other great brands as BONES Wheels, Powell Peralta, Bones Bearings, and mini logo.  They started testing wheels on their local hills well over a year ago and in the past half year or so have sent them out to multiple cities worldwide. After some great feedback, they tweaked the formula's a bit and they are ready to release their first Freeride wheel that is meant for Freeriding and Sliding. The first round of wheels will be available in 69.5mm X 80A, is ground is 51mm wide with a 42mm contact patch. The second size is 74.5mm x 80a is ground and is 54mm wide with a 45mm contact patch. What makes These Wheels so great is that they built the wheel from the core out so that the Ultra High Rebound core enhances the performance of the outer urethane. The end result is good grip, smooth slides and a VERY fast and long lasting wheel.
Look for These Wheels at PIONEERS end of may/beginning of June.. Everyone is going to need These Wheels. Call the shop or email to reserve a set.

Tuesday, April 24, 2012

Lib Tech Waterboards / Surfboards Coming Soon @ Pioneers in New Hampshire


So stoked to get our first glimpse of the Lib Tech Waterboard and that glimpse is coming soon!!! I found this amazing interview that I wanted to share with you. In it Mike Olsen the mad scientist behind all thing Lib-Tech talks about the creation of Lib Tech so many years ago and how the waterboard came about.




All the technology deep inside the waterboard...

Shapes and dimensions soon to be available...


Olson shows off the concave top which not only makes the board more responsive, but also doesn't hit your sternum while you're paddling.

“Every material in these has never been used in a surf or snowboard before, except for the [fin] screws,” says Olson of the boards. Olson began shaping surf boards in the early 80s and actually funded the launch of Lib Tech snowboards with his efforts. “It has been a dream forever to bring surf back in the mix,” he says.

The line includes three different series with 14 distinct shapes, all of which include grab rails, honeycomb construction, rubberized elastomer sidewalls, and concave tops. They also feature a non-absorptive foam, so even if you get a ding you don’t have to get out of the water. That said, following two years of protos being ridden around the world, dropped on rock beaches, and other pummeling conditions, riders have only been able to get two dings. Lib’s calling the boards “2D to D” or Dang Difficult to Ding.

As with all its other products, Olson and his crew have focused on the environmental impacts of the boards, as well as their toxicity for the shapers, and the lay-up process uses no brushes or sand paper. The honeycomb weave you can see on the boards is the result of a process called Isotropic Fusion, a one-step reaction that bonds all of the board’s materials incredibly fast. ”You can make a board at six in the morning and surf it by noon,” adds Olson. The honey comb construction also adds strength to the boards, whose flex Olson describes simply as “awesome.”

Lib is also building its own fins, but the fin boxes are FCS compatible. “FCS fins are available anywhere in the world,” explains Olson about the design.

So far only Olson and Jeff Henderson have seen the entire design process, but the duo is working on training others at the company’s headquarters in Washington, where all of the boards and fins will be made. The plan is to ramp up to full production in the next month for deliveries to hit retail, where they’ll sell for $696.96, in late spring.

The anticipation is killing me... WATERBOARDS!!!!



Board art that will be available!

Sunday, April 22, 2012

Matt Biolis of Lost Surfboards interview w/ Stab Mag



KOLOHE AND MAYHEM IN NUMBERS



A breakfast with Matt ‘Mayhem’ Biolos in which the unusually specific nature of Kolohe Andino’s boards are discussed; Stab’s theory that Mayhem succeeds because his surfboards are designed for average surfers first and then filter upwards rather than vice-versa; and the discovery that Kolohe’s pops Dino and his speed runs at Uppers were responsible for creating the outline of surfboards ridden by every monster airing kid…

It is a gloomier than usual Sydney summer morn when I scoop up California’s Matt Biolos at the Sydney factory of his shaper pal and occasional biz associate Mr James ‘Chilli” Cheal. In an industrial zone a few clicks from the beach, we see Biolos a fittish man of middle age, unshaven but not derelict, Jewish but not orthodox, grinding out boards for punters who’ve paid $80 over retail to taste his meats.

Can y’believe it? Taj Burrow and Kolohe’s personal craftsman ruining his lungs for surfers who may or may not’ve ever loosed a fin in their lives? Considering not one of those 100 sleds has my name on it, I don’t know whether to be stunned or jealous. “Every name on the order form is someone you wouldn’t know,” he says thirty mins later when we’re socking javas at the Armchair Collective in Mona Vale. “But, that’s what we’re here for! That’s what pays the bills!”

It’s a pet theme of Mr Biolos’, the importance of looking after the lil man first and believing rewards will follow. “That’s what makes surfboards so special. It’s the only piece of equipment made the way we do it.” I lay out my theory that his success is strongly related to his ability to make stable platforms for average surfers and that once pro’s get a taste of it, they want it. Therefore, his designs filter upwards whereas most shapers get their feedback from a professional and let it filter downwards, often to no one’s benefit.

“The Sub Scorcher was an average guy’s board that Kolohe rode and then it trickled up and now you’ve got Drivers and all those higher-volumed boards being ridden by the hot shots. I’m shaping high-volume boards for Julian Wilson and thinking, whoa, how did that happen?” Mick Fanning is another surfer who believes in the high-volume mantra. He was riding boards of around 24 cubic litres, often to radical success, but last year he was kinda feeling that there was more to life than a six-o by 18 3/8”. After riding a Kolohe board at Trestles he upped his cubic litres to 26 (Taj is a 23.5, if you’re wondering). “Put that volume into one of Darren Handley’s already amazing boards and they’re unbelievable,” says Matt.

We talk for a while about how Taj, when he was on the brink of leaving his board sponsor Firewire, made Matt promise he’d be there for him, surfboard-wise; about judges scoring flow more than ever before (Taj beats Adriano!); and in a scenic tour away from surfboard design talk about how Matt initially viewed the presidency of Barack Obama with suspicion (high taxes!) but now he digs on the guy. But, what stuck most in the conversation is the obsessive care taken in the building of Kolohe’s boards.

“(Kolohe’s pops) Dino’s a better version of Dr Frankenstein. He’s the ultimate grinder. He’s fanatical. I’ll be in a meeting and he’ll pace back and forth outside the door just waiting for it to end and then he’ll storm troop in and throw nine boards on the floor. Dino pushes and pushes. We get 30 blanks and we weigh ‘em all and write the weight on the order form. Then we weigh ‘em after they’ve been cut and then after they’ve been glassed. Dino personally drives ‘em to the glasser and paces back and forth at the glass shop making sure the laps aren’t too short, making sure the laps aren’t too long, weighing ‘em after they’re glassed, checking the fin angles and if the fin angles aren’t right he cuts ‘em off and puts ‘em back on again. He came to Australia, called up (shaper) Lee Stacey and said, ‘Fuck it, these waves are so sucky. I want more angles on the fins.’ So they fucking cut the fins off five boards and fucking put them back on. It’s… intense.”

Dino is more than just the meticulous father of a prodigy, howevs. Back when he was owning the US domestic circuit, Dino’s speed runs at Trestles helped create the forward outline that now, accidentally, has become the ideal shape for every hi-fi kid.

“Dino and I developed that forward outline nearly 20 years ago. Dino wasn’t using it for finners but it transitioned over nicely. Dino was always surfing Trestles, surfing Uppers, and he needed that forward outline to get down the line to do those floaters and now Kolohe uses those templates and those rockers to build a strong foundation. They force you to put it on a rail. They force you to draw out your turns. And, almost by default, they give you a much better platform for nose picks and landing backwards.”
Back at the factory, Matt stomps back into the shaping bay, the whip of Mr Cheal grazing his ample cheek. A dozen more boards to hack; a dozen more dreams to realise.

– Derek Rielly @ STAB Magazine (the most entertaining mag in the game)

Monday, January 30, 2012

Lib-Tech Surfboards/waterboards




Mike Olsen is at it again!! This time he turns his vision to the water and reinvents surfboard construction in a way only Mike/Mervin could. Environmentally friendly and made to last. Look for Lib-Tech waterboards at Pioneers Board Shop of New Hampshire this summer!!!!!!







Saturday, January 21, 2012

Free Lift Tickets at Pioneers in New Hampshire


It's Saturday, it's snowing, and it finally feels like WINTER!!!! Steve, the breakfast club, and I had a great snowy/sea smoke session this morning on some really fun waist high sets!!! Reports from the north are telling us that the snow conditions are FINALLY getting to be where they should be. If you need anything to get yourself riding swing by the shop and we'll make it worth your while. Spend $150 or more on some snowboard gear and we'll hook it up with a FREE lift ticket good to Loon, Ragged, Shawnee Peak, or Cranmore!!! Just say you read it on the blog or facebook then all that's left to do is shred!!!!!

Tuesday, January 3, 2012

Snowboard Season Update


Well, it's January third and winter is sure taking it's sweet time showing up. Even though it looks like a cold October day outside the mountains of New England are producing massive amounts of grade A snow with the current temps. I've ridden twice now, once at Wildcat and once at Gunstock and I've got to say conditions are pretty damn fun!!! Both are open from top to bottom with a bunch of runs on offer and those are just the two mountains I've been too. All the big names like Loon, Killington, Stowe, Jay Peak and Sunday River are in even better shape. Stowe and Jay picked up 6 to 8 inches last night!!! Basically the moral of the story is while it may not look like winter, it is. Drive north with your board and see for yourself.


I also wanted to do a quick review on my Burton Super Hero and Cartel; ReFlex bindings. It's been a while since I've ridden a Burton board, I've spent the last 3 years ripping my beloved Skate Banana. Well first off the overall impression of this board is IT RIPS!!! I really don't have anything negative to say about it. The board has no rocker, no camber??? Sounds crazy but it works, it's called Flat-Top construction and it's working. Lots of hold under my feet thanks in part to the "frost bite" edge technology (similar to magna-traction) and a really loose, forgiving tip and tail. I have zero powder time on it yet but I expect big things out of this board. The Super hero also features "Raduction Technology" which basically allows you to ride a smaller board without sacrificing anything. My Super Hero is a 154 and I'm 185 lbs and it's got all the hold I need. Pair the board up with some Cartel bindings (which also rule) and you've got a smooth, responsive board that is truly ready for all conditions.

My advice: buy one, you won't be disappointed.


To keep this Snow Stoke flowing we've got TICKET DEALS to get you going!!! Right now, while we've got em, spend $150 on snow gear and get a free lift ticket to CRANMORE good Sunday through Friday (say you saw it here on the blog). We're still well stocked with all things shred so if you need a whole new set-up or just a new pair of goggles swing by and we'll make it happen.

Wednesday, October 26, 2011

Ugg Boots at Pioneers in NH!!!



There is no denying it.... this Ugg thing isn't a fad. As a mother or father you know your daughter would shower you with hugs, kisses, and praise for rolling in with a new pair of Ugg Boots for them. The same would be true for a man bring his lady a pair of boots or slippers home. Hey guy, if you want to be a hero this is all you need. Or maybe you surfed way to long and came home to an angry misses... well here is the sorry that words couldn't convey.

Uggs are in! They're here in full force and if you wait to long they all be sold out and long gone. Full size runs available in lots of color and lots of styles for everyone!!! Swing by the shop or give us a call ( 1-603-964-7714) to check size and availability on the style that eating a hole in your heart. The following is a quick sample of our inventory.








Thursday, September 29, 2011

SPARK R & D SPLITBOARD BINDINGS AND ACCESORIES


Based out of Bozeman, MT Spark R&D is rider owned and operated, dedicated to pushing innovation in the sport of splitboarding, since 2005. With a view of the Bridger Mountains from our shop, we design and build splitboard bindings and accessories with backcountry performance coming first.

All of the products are manufactured and/or assembled in a small shop in Bozeman, Montana USA. From machining to anodizing, laser engraving to assembly– everything is done by a skilled team of workers who are also passionate splitboarders. In-house design and manufacturing capabilities allow our products to quickly evolve and provides us the flexibility to cater to niche customers within the splitboarding market. Spark R&D continues to step it up; seeking perfection based on customer needs and rider feedback, keeping pace with the rapidly expanding splitboarding community.

We are really excited to be working with Spark R & D in the upcoming 2011/12 season. We currently have both bindings pictured here available at the shop. Splitboarding in NH is on the come up!!!

Check out Spark's full 2012 line-up HERE.


Wednesday, September 14, 2011

New Lost Surfboard Models for 2012


Wow!!! Just got a rad email from Matt Biolis and the boys at Lost Surfboards. Now I know like Steve and I you are all Lost fanatics so I figured I would share some of the awesome new stuff Lost has going on for their 2012 lineup!!! The best part is if you can't wait all of these models are available RIGHT NOW for custom order!!!! Below you'll find photos and a brief description of each model. Give us a call or swing by with questions or custom orders!!!!










Tuesday, August 16, 2011

Rip Curl Flash Bombs in @ Pioneers in NH




The NEWEST, LATEST, & GREATEST wetsuit from Ripcurl has ARRIVED!!!!!
The Ripcurl FLASH BOMB is HERE!!!!








Here is the suit both right side and inside out!!!

There is SO MUCH amazing Technology in the new Flash Bomb so I'll try and highlight the key features!!!!

-Flash Dry Lining -two layers that when combined allow the suit to drain and dry in a flash! Super awesome when your planning on a multi session day.

-E3 Neoprene- Ripcurls highest quality neoprene. Lighter, warmer, more flexible.

-Stitchless Seam Technology- Double taped, stitchless seems eliminate pinhole leaks creating more flex and the most waterproof durable seams.

To sum it all up here is a great video both explaining the suit and showing some of it's keep features.


Here is the proof....


And because we never doing anything half ass we've got the Flash Bomb Boots, Gloves, and Hooded Vest to keep you warm and STOKED all season long!!!

Tuesday, June 21, 2011

Hampton Bowl Update!!!

Friends of The Hampton Skatepark gift to you on Go Skateboarding Day

Well it's getting real close! The Who Skates crew has been busting their asses the project and it's looking so good! It's fitting that the final pour of the bowl is taking place on Go Skateboarding Day!!! I rolled by this morning while the crew was working on the decks. I fired off a ton of photos and figured I would post them up here for all to see. The flat bottom is still in the curing process and the decks will be for the next 24 hours. Please resist the temptation to skate. We're so close to having a flawless bowl in Hampton.

Friends of The Hampton Skate Park are still looking for donations. Please support if you can and haven't already!!! We still need to raise some serious coin to get this bowl finished right. Please call for details on how you can help. Friends of The Hampton Skate Park are still selling bricks and will be for about one more week. Please help us make it happen!!!

Making it happen. Getting them decks done!!
Team effort here. This bowl is gonna rock!!! I can't believe it's down the street from my house!!!
The lady of the Crete!!! Michelle is making it happen for us... Beyond stoked she's on this project!!!

Saturday, June 4, 2011

Reef Swim Wear and Bikinis at Pioneers in NH


SO STOKED bikini weather is back! We've got a great selection of bikinis and swim wear from Reef, Volcom, and Ripcurl right now! Solids, stripes, simple, colorful, we've got just what you need to look drop dead gorgeous all summer long! We've also got some awesome straw beach hats and sunscreen to protect everything that your bikini isn't! SUMMER!!!!